MattsCarAudio.com Componet Speakers

• Power Handling Capacity (Peak) : 180W
• Power Handling Capacity (RMS) : 90W
• Nominal Impedancel : 3 ohm
• Frequency Response : 59Hz - 20kHz
• Sensitivity : 91 dB/W/M
• Motor Structure :
• Mounting Depth : 2.4"

4XL-65-92POWERBASS 6.5" MID BASS DRIVE 4-OHM

Woofer
• Brush Stainless Steel Finish
• 20 oz. High Density Ferrite Ring Magnet W/ Rubber Boot
• FEA T-Motor Design for Linear Flux Saturation to Lower Distortion
• Injection Poly Cone W/ Electro-plated Brush Black Chrome Surface
• NBR Rubber Surround Compliant W/ Black Progressive Roll Spider
• Copper Wire Coil on 1” Aluminum Former W/ Reinforced Neck Joint

Tweeter
• Custom Tooled Injection ABS Tweeter Multi Function Mounting Set
• 0.8” High Density N40 Neodymium Disc Magnet
• FEA U-Motor Design for Linear Flux Saturation to Lower Distortion
• PEN Dome and Silk Surround For Brighter Sound Performance
• Copper Wire coil on 1” Aluminum Former W/ Soldered Lead Wire

X-Over
• Single Side PCB and High Quality Soldering
• Injection ABS Casing W/ Dual Side Placement Terminals
• Natural Woofer Slope for Phase Correct Output
• 12dB Tweeter Slope W/ +3/0/-3dB Efficiency Attenuation

Woofer
• Brush Stainless Steel Finish
• 20 oz. High Density Ferrite Ring Magnet W/ Rubber Boot
• FEA T-Motor Design for Linear Flux Saturation to Lower Distortion
• Injection Poly Cone W/ Electro-plated Brush Black Chrome Surface
• NBR Rubber Surround Compliant W/ Black Progressive Roll Spider
• Copper Wire Coil on 1” Aluminum Former W/ Reinforced Neck Joint

Tweeter
• Custom Tooled Injection ABS Tweeter Multi Function Mounting Set
• 0.8” High Density N40 Neodymium Disc Magnet
• FEA U-Motor Design for Linear Flux Saturation to Lower Distortion
• PEN Dome and Silk Surround For Brighter Sound Performance
• Copper Wire coil on 1” Aluminum Former W/ Soldered Lead Wire

X-Over
• Single Side PCB and High Quality Soldering
• Injection ABS Casing W/ Dual Side Placement Terminals
• Natural Woofer Slope for Phase Correct Output
• 12dB Tweeter Slope W/ +3/0/-3dB Efficiency Attenuation

Watts MAX. Music Power	230 Watts
Watts Nominal Power Handling	50 Watts
Frequency Response	31 Hz to 35 kHz
Sensitivity (1W/1m)	90 dB
Ohm Rating	4
Mounting Depth	2-1/2" (62.5 mm)
Cut-out Dimensions	5-1/2" (139 mm)

• component speaker system includes 2 woofers, 2 tweeters, 2 crossovers, and 2 woofer grilles
• 5-1/4" fiber-textured mica polypropylene woofer
• rubber surround with non-uniform thickness for balanced woofer movement
• 1" UFLC soft dome tweeter
• external crossover with 3-level tweeter attenuation
• impedance: 3 ohms
• power range: 8-45 watts RMS (240 watts peak power)
• frequency response: 40-35,000 Hz
• sensitivity: 90 dB
• top-mount depth: 2-3/8"

• component speaker system includes 2 woofers, 2 tweeters, 2 crossovers, and 2 woofer grilles
• 6-3/4" fiber-textured mica polypropylene woofer
• rubber surround with non-uniform thickness for balanced woofer movement
• 1" UFLC soft dome tweeter
• external crossover with 3-level tweeter attenuation
• impedance: 3 ohms
• power range: 8-65 watts RMS (280 watts peak power)
• frequency response: 30-35,000 Hz
• sensitivity: 91 dB
• mounting rings included for 6-1/2" and 6"x8" applications
• top-mount depth: 2-1/4"

KFC-ST30KENWOOD TWEETER PR

KFC-T207KENWOOD COMP TWEETER 13/16"

• 150 Watts of Maximum Music Power
• Designed for Direct OEM Replacement
• 4" Bidirectional Glass-Fiber Woofer Cone
• Rubber Surround
• Powerful Strontium Magnet for Dynamic Bass Response
• 3/4" Pure Silk Dome Tweeter
• Dual Neodymium Magnets
• High Frequency Reproduction (up to 120kHz)
• Priced per pair

POWERBASS
 6.5" MID BASS DRIVE 4-OHM
SOLD AS PAIR

2XL 5.25 comp set powerbass